SikaBiresin G410 Aluminum-Filled Epoxy Surface / Mass Casting Resin

Popular Specifications

84D Shore Hardness
Up to 4" Cast Thickness
8.5 Izod Impact Strength

SikaBiresin® G410 (formerly known as Sika® TCC-410) is an aluminum-filled epoxy casting system designed for high-impact resistance, particularily prototype stamping dies. The system can be surface cast to metal or other low-cost cores, and also can be mass cast. Depending on thickness of cast, a choice of hardeners is provided to control exothermic heat and shrinkage.

Ordering Notes

Sika TCC-410 has been renamed to SikaBiresin G410. Please see equivalents below – only the names of the products have changed. All material specifications remain the same.

Legacy Name	Current Name
Sika TCC-410 Resin	SikaBiresin G410 Resin
Sika TCC-104 Hardener	SikaBiresin G104 Hardener
Sika TCC-104-5 Hardener	SikaBiresin G106 Hardener
Sika TCC-105 Hardener	SikaBiresin G105 Hardener

SKU	Description		UM	Thick	Width	Length	Height	Board ft.	Net Wt.	Diameter	Grade	Grit	Crate Qty	Plys	Radius	SPB	Ship Note	Min. Qty	Pcs/Box	Pcs/Bundle	Winding	Ft/Box	Handle Len	Head Diam	Head Len	Mfg. #	Qty

Click Here to View Our Closeout Page

Important Information

Shipping: Freeman charges standard published UPS/FedEx shipping rates (unless freight is specified). All orders under $25 are subject to a $5 small order fee. International orders are subject to a $250 minimum order.
Liquid products are sold by weight, not volume.
SPB = Sheets per Box

HAZ-G = Hazardous material, cannot ship air, up to $33 surcharge applied for each package shipped ground within the US.
HAZ-A = Hazardous material, cannot ship air, no surcharge for ground shipping.
HAZ-T = Toxic material, must be sent by freight carrier.
FRT = must be sent by freight carrier due to size, weight, or hazardous classification.