|
This table includes discontinued items and their recommended alternatives. Go back to the Current Products Only specification table. |
Mix Ratio (by wt.) |
Mix Ratio (by vol.) |
Gel Time (min.) @ 72°F |
Demold Time (hr.) @ 72°F |
Cast Thick. |
Hardness (Shore D) |
Viscosity (R/H or Mixed (cps) |
Density (g/cc) |
Volumetric Yield (in.3/lb.) |
Shrink (in./in.) |
Compressive Strength (psi) |
Flexural Strength (psi) |
Flexural Modulus (psi) |
Tensile Strength (psi) |
Deflection Temp (°F)* |
Izod Impact (ft.lb./in.) |
Cured Color |
|
RenCast 6486 (Disc. June 2022) No direct alternative |
100:50 |
1:1 |
7-8 |
8 hr. |
1/8" |
67 |
7,800/75 |
1.16 |
23.9 |
– |
– |
4,750 |
110,000 |
3,600 |
156 |
6.6 |
Amber |
Freeman 1085 (Disc. June 2022) Replaced by Freeman 1085HS |
1:1 |
1:1 |
6 |
30-120 min. |
3" |
69 |
80 |
1.12 |
24.7 |
0.002 |
4,880 |
5,600 |
170,000 |
3,300 |
137 |
0.35 |
Beige |
1:1 |
1:1 |
7 |
30 min. |
3" |
70 |
90 |
1.05 |
26.6 |
0.003 |
– |
4,500 |
235,000 |
4,500 |
– |
3.0 |
White |
|
RenPIM 6405-1 (Disc. June 2022) Replaced by Freeman 2075 |
1:1 |
90:100 |
45-55 |
24 |
– |
75 |
220 |
1.13 |
24.5 |
0.001 |
6,400 |
6,600 |
– |
4,900 |
– |
0.71** |
White |
RenPIM 6495-1 (Disc. June 2022) Replaced by Freeman 2075 |
1:1 |
90:100 |
45-55 |
24 |
– |
75 |
190-300 |
1.13 |
24.5 |
0.0007 |
6,400 |
6,600 |
– |
4,900 |
– |
0.71** |
Light Amber |
1:1 |
1:1 |
20 |
2-4 hr. |
3" |
75 |
190 |
1.09 |
25.4 |
0.001 |
– |
9,000 |
– |
5,400 |
140 |
1.32 |
White |
|
RenPIM 6450 (Disc. June 2022) Replaced by Freeman 2450 |
80:100 |
67:100 |
45-65 |
15-30 |
– |
77 |
170/1,600 |
1.13 |
23.9 |
– |
23,100 |
7,000 |
184,000 |
4,900 |
208 |
0.90 |
Black |
RenPIM 6452 (Disc. June 2022) Replaced by Freeman 2450 |
80:100 |
67:100 |
50-70 |
15-30 |
– |
79 |
30/1,600 |
1.15 |
24.1 |
– |
18,000 |
8,500 |
198,000 |
4,900 |
179 |
0.84 |
Off-White |
RenPIM 6460 (Disc. June 2022) Replaced by Freeman 2450 |
80:100 |
67:100 |
50 |
10-15 |
– |
80 |
170/1,500 |
1.18 |
23.5 |
– |
24,500 |
7,900 |
174,000 |
5,300 |
– |
1.00 |
Black |
80:100 |
67:100 |
45-65 |
15-30 |
– |
77 |
200/1,600 |
1.15 |
24 |
– |
23,100 |
7,000 |
184,000 |
4,900 |
250 |
0.90 |
Black |
|
RenCast 6432-1 (Disc. June 2022) Replaced by Freeman 1070 & 1080 |
100:50 |
100:50 |
5-6 |
1-2 hr. |
1/8" |
72 |
50/1,100 |
1.13 |
24.7 |
0.005 |
7,200 |
8,600 |
234,000 |
5,600 |
163 |
0.6 |
Off White |
100:92 |
1:1 |
3 |
15-30 min. |
1/2" |
70 |
80 |
1.05 |
26.6 |
0.010 |
3,650 |
4,500 |
132,000 |
3,000 |
140 |
– |
Off White |
|
115:100 |
1:1 |
20 |
2-4 hr. |
1/2" |
80 |
150 |
1.12 |
24.7 |
0.003 |
8,300 |
9,500 |
288,000 |
6,650 |
134 |
0.31 |
White |
|
RenCast 6491 (Disc. June 2022) No direct alternative |
1:1 |
89:100 |
4-5 |
30-40 min. |
1/8" |
85 |
200/640 |
1.22 |
23 |
– |
33,500 |
16,000 |
400,000 |
8,600 |
205 |
1.2 |
Off-White |
RenCast 6458 (Disc. June 2022) No direct alternative |
100:85 |
1:1 |
50 |
15 |
– |
86 |
75/400 |
1.21 |
22.9 |
– |
14,100 |
16,500 |
432,000 |
10,200 |
129 |
0.87 |
Clear Amber |
|
ASTM |
– |
– |
D-2471 |
– |
– |
D-2240 |
D-2393 |
D-792 |
D-792 |
D-2566 |
D-695 |
D-790 |
D-638 |
D-790 |
D-648 |
D-256 |
– |
*Deflection Temperature is the temperature when a 1/2" x 1/2" x 5" bar (supported at both ends) deflects 0.010 of an inch under a 66 psi fiber stress. The maximum service temperature may be far above this value depending on the application and the stress of the plastic at high temperature.
**Notched Izod